Guide ·Oct 28, 2023

How to Assemble a SAVA Di2 Carbon Fiber Road Bike？

In order to provide more convenience to riders, 90% of SAVA bicycles are pre-installed before customers receive them. The rest only needs to install wheels, handlebars, seat tubes and pedals. This is very useful for novices. is very friendly, but some customers feel that assembling a SAVA Di2 carbon fiber road bike may seem like a daunting task, but with the right tools and instructions, it can be a straightforward process. Whether you are a seasoned cyclist or a beginner, this guide will walk you through the steps to assemble your SAVA Di2 Carbon Fiber Road Bike.There is an installation video here：How to install Di2 bikes?

Step 1: Unboxing and Inspection

Start by carefully unboxing your SAVA Di2 Carbon Fiber Road Bike. Inspect all the components to ensure that everything is in good condition and there are no visible damages. Check for any loose parts or accessories that may have come loose during shipping.

unboxing sava bike

What’s in the Package？
An accessory box, a bicycle front wheel box, and a complete bike
The accessories box contains: hex wrench*1, seat tube clamp*1, cable link tool*1, Di2 charging cable*1, reflector*2,pedals*1pair etc.

what's in the box

Step 2: Wheel Installation

Take out the front fork protective cover and brake protective pad, and install the front wheel to the frame. Place the wheel into the dropout and make sure it is properly aligned. Insert the thru-axle rod through the disc, turn the lever clockwise until it is secure, and tighten the thru-axle rod.

Step 3: Seatpost and Saddle Installation

Take out the two wires from the seat tube and straighten them up. You will find a long wire and a short wire. The long wire is connected to the rear dial. Insert the long wire into the copper plate interface of the seat post. A short wire can be inserted into the other two holes, and then inserted into the seat tube. Remember to put in the seat tube first and then the seat tube clamp to prevent the seat tube clamp from falling into the frame.

Step 4：Handlebar and Stem Installation

Begin by installing the handlebar and stem. Align the stem with the front fork and tighten the bolts using an Allen wrench. Make sure the handlebar is straight and at a comfortable height and angle for your riding style.

Step 5: Pedal Installation

Now it's time to install the pedals. Start by identifying the left and right pedals. The left pedal is usually marked "L" and the right pedal is usually marked "R". Use a pedal wrench to thread the pedal into the crank arm. Turn the left pedal toward the front wheels (counterclockwise), and turn the right pedal toward the rear wheels (clockwise).
Be careful to align the threads when installing the pedal to avoid damage to the crank threads due to incorrect operation.

Step 6: Final Check and Test Ride

Before taking your SAVA Di2 Carbon Fiber Road Bike for a test ride, double-check all the components to ensure they are properly tightened and adjusted. Check the tire pressure, brakes, and gears one last time. Once you are satisfied with the assembly, take your bike for a short test ride to ensure everything is working smoothly.

By following these step-by-step instructions, you can confidently assemble your SAVA Di2 Carbon Fiber Road Bike. Remember to always refer to the manufacturer's instructions for specific details and consult a professional if you are unsure about any step of the assembly process. Enjoy your new bike and ride safely