The cheapest power surfboard in the world,High speed and long-term endurance,Even in some of the best surf spots in the world that have the perfect breaking waves, your surfing experience still depends heavily on weather and sea conditions. Unless of course you have an electric surfboard.
【100% Carbon fiber 】the plate body is upgrated and thickened with carbon fiber，It makes the surf board very light and enhances its own buoyancy. The carbon brazing material has the effect of shock absorption, which makes the surf board very balanced, and also has high strength and wear resistance.
【Two stroke water cooled engine】provide strong power,has fast heat dissipation ,low noise,and can run at high speed for a long time
【Quick release tail fin】carbon fiber strengthens the tail fin，through numerous experiments ,the unique five-grab design can achieve a real balance effect and break through the water more powerfully
【3.5L large fuel tank】The battery life is longer,and the smooth battery life can reach about 100 kilometers，use 30 liters of 95# gasoline+1 liter of FD grade two-stroke oil
Removable Racing Foot Straps
with an option of foot strap free option. Rubber pad on the board helps with motorized surfboard initial attempts to stand up.
Mechanical design, with this grip, the surfboard can be easily lifted on the water, and it is also convenient to carry the surfboard.
Quick release tail fin
carbon fiber strengthens the tail fin,through numerous experiments,the unique five-grab design can achieve a real balance effect and break trough the water more powerfully
Quick release water pipe
Unique quick release design for easy replacement.
ADVANCED DESIGN & TECHNOLOGY
The material structure of carbon brazing makes the surfboard lighter, and the streamlined design reduces the resistance of the water, which greatly improves the speed and saves more fuel.
Special rack for powered surfboards, easy to place and save space. Provide convenience for cleaning and checking the surfboard
2 STROKE 109 CC ENGINE
Strong power,low noise,3.5L large fuel tank,use 30 liters of 95# gasoline +1 liter of FD grade two-stroke oil
Jet board(mm) Overall length:1760mm Overall width :600mm Overall hight:150(out of fin) Net weight:26kg Jet Pump Type:Axial flow，single stage Min. water depth:50cm Max. Person:1person Max. capacity:120kg Max speed:48km/h Fuel capacity:3.5L EngineType:Two-stroke water-cooled Displacement:109 ml Bore× Stroke:53mm×49.6mm Max power:8 Idling speed:2800 r/min Fuel mixing ratio:30:1 Ignition form :DC digital ignition Battery:Lithium battery Group integrated in the ECU Spark plug model :BPM7A Packing size:1900mm×680mm×300mm
Put the surfboard on the stand before into the water. 1.Check whether the handle throttles smoothly, and whether the protection switch plugs and pulls smoothly.
2.Check whether the intake hose is crushed and broken. (The intake hose mouth cannot touch the water surface.)
3.Check whether the jet impeller is wrapped by foreign matter, whether the cooling pipe is connected to the spray pump firmly and if there is any breakage.
4.Check if the exhaust pipe is unobstructed.
5.Open the engine hatch cover and check:
Open the tank cap, Check the air pipe and make sure there is no petrol in air pipe. Check the connection of intake/ exhaust pipes, the oil pipe and the cooling water pipe, make sure they are connected well; and make sure there is no bubble in oil pipe. Check whether the electrical circuit is short or open, and the connector is loose or falling off. Check whether the battery is fully charged. Check whether the spark plug cap is firmly connected. Check that the pump is working properly. Before riding, spray the engine and the idle bearing with oil WD-40(type), once a day.
Start the engine and rev it twice. The engine is only allowed to run without water cooling for a maximum of 10 seconds; otherwise the engine would overheat and one way valve will be burnt out.
6.In any case, press the engine start button no more than 5 times in a row，otherwise you must wait for 5 minutes. Do not ride in the water area with aquatic weeds and garbage. Do not ride in sandy waters that the water depth less than 90CM.
Warm up before riding: Take the surfboard to the water and let the bow close to the shore supports. Start the engine and let it run 2~5 minutes, in addition check the height of cooling water spout on the right side and the operation of water pump. Then you can ride if all of the above is normal.
Immediately after each riding: Hold the surfboard up to the shore and stand upside down. Keep the intake hose down and wait until the rest of the water from the inside of the board drains out. Put the surfboard on the stand. Start engine, 3~4 seconds, and wait until the rest of the water from the exhaust pipe drains out. After riding your board in salt water, wash it with freshwater including the inner space and engine, and then let the engine run for about 5 seconds. Let the inner space dry out. Spray the whole engine thoroughly with WD-40 oil. Start engine again for 1~2 seconds before injecting proper amount WD-40 oil into carburetor inlet, to prevent internal parts from rusting.
Usually, we default to ship by sea , If you want to speed up the shipping or volunting to pay more to receive the product more quickly, please contact us. We will help you to send DHL/UPS/ DPD or other air parcel.
Asian and Russia: special line logistics, 30-40 days,with tracking
United States: By sea ,the delivery time is 40 days, UPS with tracking; By air transport (battery is sent separately) is about 12 days, UPS with tracking
Canada: By sea, 50 days. UPS with tracking Mexico: By sea, 40-50 days.No Tracking Europe: By sea, 50 days . UPS with tracking; By air transport with battery, 12-15 working days, DPD with tracking