Es wird Spaß machen, Sie diesen Sommer zu haben
Das Power-Skateboard bringt den Surfern das perfekte Segelerlebnis. Das ultraleichte Carbon-Lötmaterial, der wassergekühlte Zweitaktmotor und der 3,5-Liter-Kraftstofftank ermöglichen dem Power-Skateboard eine beeindruckende Geschwindigkeit von 50 km/h und eine große Reichweite von 100 km. Kohlefaser stärkt die Schwanzflosse, durch zahlreiche Experimente kann das einzigartige Fünf-Grab-Design einen echten Balanceeffekt erzielen und das Wasser kraftvoller durchbrechen, stilvolles, dynamisches Design, wird Surfer definitiv zu einem unerwarteten Effekt machen.
Paket: 1960 x 700 x 280 mm
Über den Versand von SAVA Power Surfboards:
Derzeit dauert es 20 Tage für die Fabrikproduktion, Montage, Prüfung und den Versand. Normalerweise versenden wir standardmäßig auf dem Seeweg. Wenn Sie beschleunigte Luftfracht benötigen, müssen Sie zusätzliches Geld hinzufügen. Vielen Dank für Ihre verstehen
Asien und Russland: Spezielle Linienlogistik, 30–40 Tage, mit Sendungsverfolgung
Vereinigte Staaten: Auf dem Seeweg, 40 Tage, UPS hat Sendungsverfolgung; Per Lufttransport (Batterie wird separat verschickt) beträgt 12 Tage, SF mit Sendungsverfolgung
Kanada: Auf dem Seeweg 50 Tage. UPS hat Sendungsverfolgung
Mexiko: Auf dem Seeweg, 40–50 Tage. Keine Sendungsverfolgung
Europa: Auf dem Seeweg, 50 Tage. UPS hat Sendungsverfolgung; Per Luftfracht mit Batterie, 12-15 Werktage, DPD hat Sendungsverfolgung
SAVA Power Surfboard-Verwendungshandbuch:Download
So installieren Sie ein SAVA Power Carbon-Surfbrett:https://youtu.be/_nysBkPK9ig
Jet board(mm)
Overall length:1760mm
Overall width :600mm
Overall hight:150(out of fin)
Net weight:26kg
Jet Pump Type:Axial flow，single stage
Min. water depth:50cm
Max. Person:1person
Max. capacity:120kg
Max speed:48km/h
Fuel capacity:3.5L
EngineType:Two-stroke water-cooled
Displacement:109 ml
Bore× Stroke:53mm×49.6mm
Max power:8
Idling speed:2800 r/min
Fuel mixing ratio:30:1
Ignition form :DC digital ignition
Battery:Lithium battery Group
integrated in the ECU
Spark plug model :BPM7A
Packing size:1900mm×680mm×300mm
Put the surfboard on the stand before into the water.
1.Check whether the handle throttles smoothly, and whether the protection switch plugs and pulls smoothly.
2.Check whether the intake hose is crushed and broken. (The intake hose mouth cannot touch the water surface.)
3.Check whether the jet impeller is wrapped by foreign matter, whether the cooling pipe is connected to the spray pump firmly and if there is any breakage.
4.Check if the exhaust pipe is unobstructed.
5.Open the engine hatch cover and check:
Open the tank cap, Check the air pipe and make sure there is no petrol in air pipe.
Check the connection of intake/ exhaust pipes, the oil pipe and the cooling water pipe, make sure they are connected well; and make sure there is no bubble in oil pipe.
Check whether the electrical circuit is short or open, and the connector is loose or falling off.
Check whether the battery is fully charged.
Check whether the spark plug cap is firmly connected.
Check that the pump is working properly.
Before riding, spray the engine and the idle bearing with oil WD-40(type), once a day.
Start the engine and rev it twice. The engine is only allowed to run without water cooling for a maximum of 10 seconds; otherwise the engine would overheat and one way valve will be burnt out.
6.In any case, press the engine start button no more than 5 times in a row，otherwise you must wait for 5 minutes.
Do not ride in the water area with aquatic weeds and garbage. Do not ride in sandy waters that the water depth less than 90CM.
Warm up before riding:
Take the surfboard to the water and let the bow close to the shore supports. Start the engine and let it run 2~5 minutes, in addition check the height of cooling water spout on the right side and the operation of water pump. Then you can ride if all of the above is normal.
Immediately after each riding:
Hold the surfboard up to the shore and stand upside down. Keep the intake hose down and wait until the rest of the water from the inside of the board drains out.
Put the surfboard on the stand. Start engine, 3~4 seconds, and wait until the rest of the water from the exhaust pipe drains out.
After riding your board in salt water, wash it with freshwater including the inner space and engine, and then let the engine run for about 5 seconds. Let the inner space dry out.
Spray the whole engine thoroughly with WD-40 oil. Start engine again for 1~2 seconds before injecting proper amount WD-40 oil into carburetor inlet, to prevent internal parts from rusting.
Usually, we default to ship by sea , If you want to speed up the shipping or volunting to pay more to receive the product more quickly, please contact us.
We will help you to send DHL/UPS/ DPD or other air parcel.
Asian and Russia: special line logistics, 30-40 days,with tracking
United States: By sea ,the delivery time is 40 days, UPS with tracking; By air transport (battery is sent separately) is about 12 days, UPS with tracking
Canada: By sea, 50 days. UPS with tracking
Mexico: By sea, 40-50 days.No Tracking
Europe: By sea, 50 days . UPS with tracking; By air transport with battery, 12-15 working days, DPD with tracking